STORAGE BOTTLES WIDE NECK

In high density polyethylene. Ideal for liquids or powders. Provided by inner cap for a perfect leak proof. Equipped by a strong handle for the transportation. Suitable for foodstuff.

ART. VOL. LT Ø MOUTH MM Ø BOTT. MM H. MM
11001 5 94 170 340
11002 10 108 210 415

 

STORAGE BOTTLES, NARROW NECK

In high density polyethylene. Ideal for liquids or powders. Provided by inner cap for a perfect leak proof. Equipped by a strong handle for the transportation. Suitable for foodstuff.

ART. VOL. LT Ø MOUTH MM Ø BOTT. MM H. MM
11021 5 62.5 170 345
11022 10 62.5 210 425
11025 25 95.5 280 565
11026 50 95.5 350 700

 

STORAGE BOTTLES WITH TAP

In high density polyethylene. Ideal for liquids or powders. Provided by inner cap for a perfect leak proof. Equipped by a strong handle for the transportation. Suitable for foodstuff. Screw tap with 3/4" edged attack.

 

ART. VOL. LT Ø MOUTH MM Ø BOTT. MM H. MM
11041 5 62.5 170 345
11042 10 62.5 210 425
11045 25 95.5 280 565
11046 50 95.5 350 700

 

TAP FOR STORAGE BOTTLES

In polypropylene. 3/4" BSP thread.

ART.
11051
  STACKABLE TANKS

In high density polyethylene. Provided with handle for easy transport and cap with safety device, according to DIN provisions. The three biggest volumes (5, 10, 20 litres) are conform to O.N.U. homologation for the transport of hazardous liquid substances. Suitable for foodstuff.

ART. VOL. LT DIM. MM
11061 2 155x115x175
11062 5 163x187x236
11063 10 187x227x320
11064 20 236x288x390

 

  TANKS WITH TAP

In high density polyethylene. Studied to optimize laboratory space, they are provided with handle for easy transport. Suitable for foodstuff.

ART. VOL. LT DIM. MM
11071 10 300x160x380
11072 20 370x180x470

 

  BOTTLES CARRIER

In high density polyethylene. Suitable to transport 6 bottles with diameter up to 95 mm and 4 bottles with diameter up to 120 mm. Stackable.

ART. N. PLACES DIM. MM COLOUR
11080 6 300x200x320 Red
11085 4 300x270x310 Yellow

 

  CYLINDRICAL BOTTLES NARROW NECK

In polyethylene, graduated, with inner cap. Particularly useful for the storage of both acids and alkals. Provided with tagging or sealing hole. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM Ø BOTT. MM H. MM
11091 50 18.5 39 70
11092 125 18.5 46 107
11093 250 23 60 131
11094 500 23 74 157
11095 1000 33 94 205
11096 2000 33 112 266

 

  CYLINDRICAL BOTTLES NARROW NECK - DARK GRAY

In polyethylene, graduated, with inner cap. Particularly suitable for the storage of liquids or other light sensitive materials. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM Ø BOTT. MM H. MM
11101 50 18.5 39 70
11102 125 18.5 46 107
11103 250 23 60 131
11104 500 23 74 157
11105 1000 33 94 205
         

 

  CYLINDRICAL BOTTLES WIDE NECK

In polyethylene, graduated, with inner cap. The wide neck facilitates operations of filling and emptying the bottles. Provided with tagging or sealing hole. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM Ø BOTT. MM H. MM
11121 50 24 40 77
11122 100 24 48 89
11123 250 34.5 61 126
11124 500 34.5 75 158
11125 1000 45 93 200
11126 2000 45 115 247

 

  GRADUATED NARROW NECK BOTTLES

In polypropylene, autoclavable. Provided with tagging or sealing point. Neck and thread conform to DIN 13316 and 168 norms. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM DIM. MM DIN STD
11131 20 13 Ø 38 x 92 GL18
11132 100 13 Ø 48 x 108 GL18
11133 250 19 Ø 60 x 150 GL25
11134 500 19 Ø 75 x 182 GL25
11135 1000 23 Ø 95 x 224 GL32

 

  GRADUATED WIDE NECK BOTTLES IN PE

In polyethylene. Provided with tagging or sealing point. Neck and thread conform to DIN 13316 and 168 norms. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM DIM. MM DIN STD
11151 50 24 Ø 38 x 88 GL32
11152 100 24 Ø 48 x 105 GL32
11153 250 38 Ø 60 x 140 GL45
11154 500 38 Ø 75 x 170 GL45
11155 1000 55 Ø 95 x 206 GL63
11156 2000 55 Ø 120 x 252 GL63

 

  GRADUATED WIDE NECK BOTTLES IN PP

In polypropylene, autoclavable. Provided with tagging or sealing point. Neck and thread conform to DIN 13316 and 168 norms. Suitable for foodstuff.

ART. VOL. ML Ø MOUTH MM DIM. MM DIN STD
11171 50 24 Ø 38 x 88 GL32
11172 100 24 Ø 48 x 105 GL32
11173 250 38 Ø 60 x 140 GL45
11174 500 38 Ø 75 x 170 GL45
11175 1000 55 Ø 95 x 206 GL63
11176 2000 55 Ø 120 x 252 GL63

 

  DIN THREAD REAGENT BOTTLES

In trasparent polypropylene, autoclavable. Wide mouth, with screw cap. Very resistent to breaking, ideal for the storage of the reagents.

ART. VOL. ML THREAD GL H. MM
11271 100 32 96
11272 250 45 132
11273 500 45 172
11274 1000 63 204
11276 2000 63 243

 

  OPAQUE REAGENT BOTTLES

In polypropylene, opaque colour, autoclavable. Wide-mouth, with NS polypropylene stopper. Studied for light-sensitive substances in accordance with DIN 12039 standards.

ART. VOL. ML THREAD GL H. MM
11511 500 45/40 183
11512 1000 60/46 214
11513 2000 60/46 263

 

  WATER SAMPLING BOTTLES

Water sampling bottles manufactured in high density polyethylene (HDPE), stout and unbreakable. Labelled, leak-proof screw cap with anti-tamper strips, available with pre-filled SodiumThiosulfate when Chlorine neutralization is required. Sterile, individually wrapped, peel-pack.

ART. DESCRIPTION VOL. ML DIM. MM SHAPE
11270 Empty 250 Ø 60 x 135 Cylindrical
11275 With Sodium Thiosulfate 250 Ø 60 x 135 Cylindrical
11280 Empty 500 150 x 80 Square
11285 With Sodium Thiosulfate 500 150 x 80 Square
11290 Empty 1,000 200 x 80 Square
11295 With Sodium Thiosulfate 1,000 200 x 80 Square

 

  SQUARE BOTTLES

In high density polyethylene, graduated. The closure with the inner cap guarantees a perfect tightness. Particularly suitable for powders and pastes. The rectangular shape allows a rational use of the room, favouring storage or shipment. Provided with tagging or sealing hole. Suitable for foodstuff.

ART. VOL. ML DIM. MM Ø MOUTH MM H. MM
11141 25 32X34 18 52
11142 50 38X38 24 70
11143 100 42X48 34.5 90
11144 250 57X60 34.5 110
11145 500 70X80 45 138
11146 1000 80X103 58 176
11147 2000 100X134 58 210

 

  SECURITY SEAL FOR BOTTLES

Stainless steel cable in 7 wires, progressive numbering. Usable on all bottles provided by cap with sealing hole.

ART. LENGTH MM
11040 150

 

  NARROW NECK (Ø 22 MM) BOTTLES WITH TAMPER-EVIDENT CAP

High density polyethylene (HDPE) bottles with white tear-seal screw cap opening. Ideal for purposes for which is not allowed the outcome opening after the filling. Not graduated. Suitable for foodstuff.

ART. VOL. ML DIM. MM Ø MOUTH MM
11191 50 Ø 36 x 84 17.5
11192 100 Ø 44 x 101 17.5
11193 250 Ø 60 x 136 22.5
11194 500 Ø 74 x 170 22.5
11195 1000 Ø 90 x 222 22.5

 

  NARROW NECK BOTTLES WITH TAMPER-EVIDENT CAP

Bottles manufactured in high density polyethylene (HDPE) with black tamper-evident cap incorporates a safety ring which is locked when the cap is screwed on to the bottle. Opening the bottle breaks the safety ring, showing signs of interference. Not graduated. Suitable for foodstuff. Neck Ø 30 mm.

ART. VOL. ML DIM. MM
11201 250 Ø 60 x 137
11202 500 Ø 74 x 177
11203 1000 Ø 90 x 230

 

  NARROW NECK BOTTLES WITH TAMPER-EVIDENT CAP

Bottles manufactured in high density polyethylene (HDPE) with white tamper-evident cap incorporates a safety ring which is locked when the cap is screwed on to the bottle. Opening the bottle breaks the safety ring, showing signs of interference. Not graduated. Suitable for foodstuff. Neck Ø 45 mm

ART. VOL. ML DIM. MM
11196 1000 Ø 90 x 216
11197 2000 Ø 120 x 259

 

  WASH BOTTLES

In polyethylene, graduated, with a curved straw. The outlet of the liquids is caused by a pressure of the hand on the body of the bottle. Suitable for foodstuff.

ART. VOL. ML H. MM
11161 100 115
11162 250 140
11163 500 180
11164 750 190
11165 1000 220

 

  WASH BOTTLES

In polyethylene, with straight straw. The outlet of liquid is caused by a pressure of the hand on the body of the bottle. Suitable for foodstuff.

ART. VOL. ML H. MM
11181 100 95
11182 250 140
11183 500 165
11184 750 190
11185 1000 210

 

  INTEGRAL WASH BOTTLES

Polyethylene wash bottles with integral dispensing moulded tube in order to avoid water leak due to a not perfect seal between cap and tube. Dispensing spout is provided by a pratical lid catcher cap. Bottles oval and ergonomic shape allows easy handling and more stability. Suitable for foodstuff.

ART. VOL. ML DIM. MM H. MM DIN STD
11261 250 60 x 119 140 GL32
11262 500 65 x 122 178 GL32

 

WIDE MOUTH WASH BOTTLES INTEGRAL CAP

Polyethylene graduated bottles with wide mouth for an easier and safe filling. Screw cap moulded with the dispensing tube in order to avoid water leak due to a not perfect seal between cap and tube. Caps available in 4 colours for an easy and immediate content identification. Mouth Ø 38mm - DIN Standard GL45.

ART. VOL. ML DIM. MM CAP COLOUR
11363.00 250 Ø 60 x 191 Neutral
11363.04 250 Ø 60 x 191 Blue
11363.06 250 Ø 60 x 191 Yellow
11363.10 250 Ø 60 x 191 Red
11364.00 500 Ø 75 x 218 Neutral
11364.04 500 Ø 75 x 218 Blue
11364.06 500 Ø 75 x 218 Yellow
11364.10 500 Ø 75 x 218 Red

 

SPRAY BOTTLE

High density polyethylene (HDPE) bottles equipped by atomizer with adjustment jet. 1.25 ml dispensing pump.

ART. VOL. ML DIM. MM Ø MOUTH MM
11301 500 Ø 74 x 220 21
11302 1000 Ø 90 x 271 22.5

 

DISPENSING BOTTLE

High density polyethylene (HDPE) bottles with dispenser in polypropylene. Suitable for liquid and creams, single and/or continuous dispensing.

ART. VOL. ML DIM. MM Ø MOUTH MM
11401 500 Ø 77 x 229 22.5

 

CYLINDRICAL JARS WITH CAP

In high density polyethylene with screw cap and inner stopper. Particularly suitable for powders and solid samples.

ART. VOL. ML DIM. MM
14161 70 Ø 50x60
14162 120 Ø 56x71
14163 250 Ø 69x94
14164 500 Ø 85x110
14165 1000 Ø 111x128
14166 2000 Ø 111x240

 

CYLINDRICAL JARS WITH TAMPER-EVIDENT CAP

Polypropylene jars in white colour, with hermetic closure and tear seal. Ideal for purposes for which is not allowed the outcome opening after the filling.

ART. VOL. ML DIM. MM
14171 50 Ø 35 x 50
14172 100 Ø 50 x 60
14173 250 Ø 65 x 85
14174 500 Ø 90 x 110
14176 1000 Ø 110 x 120

 

English French German Italian Portuguese Russian Spanish